Wyse Vx0LE: Hardware 

• Hardware
• Vx0
• Vx0L
• Vx0LE
• Firmware
• Linux
• Win98
• Mods

The Vx0LE uses the same hardware as the Vx0L, the only difference being the uprated CPU which runs at 1.2GHz rather than 800MHz. The V30LE I have was manufactured in January 2012.

Specifications

The basic specs for the Vx0LE are:

Processor
Type    Speed	VIA C7 Eden 1.2GHz
Memory
	Flash      RAM V10LE 128MB 512MB V30LE 128MB 512MB V50LE 128MB 256MB V90LE 512MB 256MB
Video
Chip    Max resolution	CN700? 32-bit color:   16-bit/64K colors: up to 1280x1024@100H   up to 1280x1024@85Hz up to 1600x1200@85Hz   up to 1600x1200@60Hz up to 1920x1440@60Hz   up to 1920x1440@60Hz 24-bit/16.7M colors:    up to 1280x1024@100Hz
Ports
Network    USB    Serial    Parallel    PS/2	10/100 3 x USB2.0 1 1 2
Power
Supply    Plug    Off    Running	12V ?A Coax: 5.5mm/2.1mm 2W 12-15W
Dimensions
W x H x D	4.6cm x 20.1cm x 18cm

NB: I haven't removed the heatsinks but, when running Tinycore Linux, an lspci identifies the graphics chip/driver as: CN700/PM4800 Pro/PM4800 CE/VN800 [S3 UniChrome Pro]

CPU

For those to whom it matters here is some detail from Linux's /proc/cpuinfo

vendor_id	:	CentaurHauls
cpu family	:	6
model	:	13
model name	:	VIA Eden Processor 1200MHz
stepping	:	0
flags	:	fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge cmov pat clflush acpi mmx fxsr sse sse2 tm pni est tm2 xtpr rng rng_en ace ace_en ace2 ace2_en phe phe_en pmm pmm_en

PCI

00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 8d)
00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] (rev 01)

Power Supply

The unit uses a small external power unit rated at 12V @4A. The connector is the usual 5.5mm/2.1mm coax plug.

For the rest of the details see the V90L tab.