Logo

Wyse R90L: Early Hardware 

This section highlights the difference between the early Rx0 hardware and the later revision.

Quick Summary:

  • 1GHz CPU rather than 1.5GHz.
  • No SATA support.

I haven't seen an early version of the Rx0LE so can't comment on that.

CPU

For those to whom it matters here is some detail from Linux's /proc/cpuinfo

vendor_id:AuthenticAMD
cpu family:15
model:111
model name:AMD Sempron(TM) BGA processor 1.0GHz
stepping:2
flags:fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good extd_apicid pni cx16 lahf_lm extapic cr8_legacy 3dnowprefetch vmmcall

Motherboard Inside an early wyse Rx0L

Click on the photo for a larger version.

The motherboard is almost identical to the one fitted to the later Rx0L. The only obvious difference is that it is not tracked for a SATA port. This difference is shown below.

Sata socket on later R90L motherboard

Sata socket on earlier R90L motherboard