Logo

Fujitsu Futro S900: Variant 

Variant

In May 2024 I heard from Bartosz who had a S900 but with a different cooling arrangement to the one I had. He wrote:

Some time ago I bought Fujitsu Futro S900 thin client but my example has a different cooling arrangement to the one that you show on your website:

Futro S900 circuit board

I guess that normally there is only a single heat sink on the CPU, but in my version there are two heat sinks, the second of which is located in the free space below the motherboard. The two are connected by a copper heat pipe that is welded at each end.

The location of the second heatsink makes the PCI slot unusable.

Another point of note is, thanks again to the location of the second heatsink, they haven't bothered to fit the PoE connector.

If the PCI connector is important to you you will need to check with the seller before buying.

I asked Bartosz to send me a copy of the label on his S900. In comparing his with mine I couldn't see anything immediate that could indicate a particular variant of the S900.

He also provided some general observations that you will find under the Using tab.